Call Us: +919643077962
ISO 17712 Certification in India

ISO 17712 Certification in India

150000 INR/Piece

Product Details:


Price And Quantity

  • 1 Piece
  • 150000.00 - 200000.00 INR/Piece
  • 150000 INR/Piece

Trade Information

  • All India

Product Description

ISO InternationalOrganization for Standardization is the worlds largest developer of voluntaryInternational Standards. A standard is a document that provides requirements,specifications, guidelines or characteristics that can be used consistently toensure that materials, products, processes and services are fit for theirpurpose. ISO International Standards ensure that products and services aresafe, reliable, and of good quality. ISO 17712 is the standardised documentthat establishes uniform procedures for the classification, acceptance, andwithdrawal of mechanical freight container seals. It provides a single sourceof information on mechanical seals which are acceptable for securing freightcontainers in international commerce. ISO 17712 defines three types of classesof security seal strength, or barrier capacity I for Indicative S for Securityand H for High Security. CTPAT requires the use of H class seals. Suppliersmust use independent third party test laboratories to validate a security sealsclassification. The test laboratory must also be accredited according to ISO IEC17025 General requirements for the competence of testing and calibrationlaboratories to perform testing specific to ISO 17712.The ISO 17712 standardrequires independent testing against three main categories, Mechanical Testingto determine a security seals physical strength Clause 5,H Class Security Sealsor High Security Seals are manufactured to the highest standards and are markedwith a H on the seals body. The most popular high security seals are bolt sealsand cable seals. In May 2014, new requirements were published for ISO 17712 2013,for all security seals to be compliant, they must be categorized and marked Has High Security Seals. When undergoing mechanical testing by an independentISO 17025 accredited laboratory Clause 5 and the manufacturer must be certifiedto both ISO9001 and ISO17712 Annex A. Seals be designed and constructed withtamper indicative features that generate tell tale evidence of tampering Clause6.The new requirement for High Security Seals also states that the securityseal must also be compliant with Clause 6 Evidence of Tampering. Clause 6requires the manufacturer to have a documented and audited process and testspecification in place in its quality manual for all High Security Seals in itsproduct range. Clause 6 is a valuable addition to the seal standard emphasizingthe importance of continuous improvement of tamper resistance and tamperindicating features on security seals. If a High Security Seal is only presentedto you with a clause 5 certificate or just a clause 6 certificate then it doesnot have the H classification, which means it is not a High Security Seal. Thefollowing products are H class Security Seals 2K Klicke r, MCLZ, and BarSeal. Auditing of manufacturers security related business processes Annex A. Poorsecurity related manufacturing practices can undercut the effectiveness of ahigh quality security seal. ISO 17712s Annex A defines over two dozen requiredpractices, such as facility risk assessments and access controls to productionand storage areas. Suppliers conformance with Annex A should also bedemonstrated through an independent certification provider that is accreditedto audit compliance with the ISO standards. In order to verify that a HighSecurity Seal is certified as ISO 17712 2013, You must contact your securityseal supplier and ask them to provide the ISO certificates mentioned below. Themanufacturer of the seal has to be ISO 9001 certified. The manufacturer of theseal has to be ISO 17712 2013 Annex A Best Practices certified. The mechanicalstrength of the seal has to meet or exceed the requirements of ISO 17712 Clause5 High Security Seal category. This is documented by a ISO 17712 2013 Hlaboratory report  certificate for theseal.ISO17712 2013 Clause 6 Tamper Evidence Compliance Letter. The testlaboratory performing the strength tests must be ISO 17025 accredited toperform ALL 5 mechanical tests according to ISO 17712 2013 Clause 5.


Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'ISO 17712 Testing & Certification' category

Back to top
CDG INSPECTION LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.