GST : 06AAFCC0655B1Z8

Call us: 08062376212

Change Language
Ingress Protection (IP) Testing in Gandhinagar

Ingress Protection (IP) Testing in Gandhinagar

Product Details:


Product Description

Ingress Protection, Ingress protection (IP) tests are performed to ensure enclosures provide adequate protection against the environment in which they are located. Tests include ingress of solid foreign objects, water and dust. Measurements are performed according to the procedures of AS 60529 (IEC 60529).  The IP Code outlines a system of classification for the protection of electrical enclosures against the intrusion of foreign bodies (i.e., tools, fingers, dust, etc.) and moisture. The rating is specified by the letters IP followed by two digits i.e. IP25, IP68, etc. First number , Degree of ingress protection, The first number of the IP code indicates the degree of protection against contact with moving parts and the degree that the equipment is protected against solid foreign bodies intruding into an enclosure.0, No special protection,1 , Protection from a large part of the body such as hand or from solid objects greater than 50 mm in diameter,2 , Protection against objects not greater than 80 mm in length and 12 mm in diameter,3 , Protection from entry by tools, wires, etc., with a diameter or thickness greater than 2.5 mm,4 , Protection from entry by solid objects with a diameter or thickness greater than 1.0 mm,5 , Protection from an amount of dust that would interfere with the operation of the equipment,6 , Dust, tight, Second number , Degree of moisture protection, The second number indicates the degree of protection for the equipment inside the enclosure against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.),0 , No special protection,1 , Protection from vertically dripping water,2 , Protection from dripping water when tilted up to 15,3 , Protection from sprayed water,4 , Protection from splashed water,5 , Protection from water projected from a nozzle,6 , Protection against heavy seas, or powerful jets of water,7 , Protection against temporary immersion,8 , Protection against complete continuous submersion in water (up to 1 metre deep for 15 minutes). IP1X, Protected against solid foreign objects of 50 mm diameter and greater.IP2X, Protected against solid foreign objects of 12.5 mm diameter and greater.IP3X, Protected against solid foreign objects of 2.5 mm diameter and greater.IP4X, Protected against solid foreign objects of 1.0 mm diameter and greater.IP5X, Dust protected Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety.IP6X, Dust tight No ingress of dust. Ingress Protection (IP) Testing. Ingress protection testing is performed to check for a products ability to resist the infiltration of water, dust, and other foreign solids to ensure functionality, safety, and product compliance. It is part of waterproofness testing. Obtaining the appropriate IP rating for products is essential in various industries, from consumer electronics, automobiles, avionics to wires and cables. IP rating varies over a range of degrees of protection from liquids or solids or both depending on the industrial standard, the product tested, and marketing requirements.

Product details 

Testing For

Ingress protection( Liquid & solid particales )



Device/Equipment Type


Property Size


Number Of Devices




Enter Buying Requirement Details
Email Id
Mobile number

Back to top